ActionTec HPE200AV User Manual page 35

Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual
6. The "
Properties" window appears. Select
TCP/IP
7. In the
Address tab, make sure the circle next to "Specify an
IP
selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
8. Enter the following numbers in the "
Press the space bar on the keyboard to add the periods between the numbers.
9. Enter the following numbers in the "Subnet mask" text box:
Press the space bar on the keyboard to add the periods between the numbers.
10. Click
. The
OK
11. In the Network window, click
12. The "System Settings Change" window appears, asking whether the computer
should be restarted. Click Yes.
The computer restarts. It is now set up with a static
192.168.1.2
255.255.255.0
Properties window disappears.
TCP/IP
OK
Address.
IP
Address" text box:
IP
. The Network window disappears.
address.
IP
32
Address" is
IP