Table of Contents
Advertisement
Corporate AV Example 2
A ground stack system is used to provide voice and music playback for a corporate function within a traditional hotel
ballroom. A ground-stack system provides voice and music playback for a corporate function within a traditional hotel
ballroom. The system has two ground stacks, one at the left of the stage, one at the right. Each contains four SM5
modules and two SMS118 subwoofers.
Ground Stack Arrays (x2)
Amplification
4x SM5 Module
1x ShowMatch Tour Rack
Subwoofer
2x SMS118
Corporate AV application 2
LEFT
RIGHT
SM5 100°
SM5 100°
SM5 100°
SM5 100°
SM5 100°
SM5 100°
SM5 100°
SM5 100°
SMS118
SMS118
SMS118
SMS118
22
Preset Guide
Arrays
Ground Stack 90 Hz HPF
Sub
SMS118 Sub 90 Hz LPF
PRO.BOSE.COM
SHOWMATCH TOUR RACK
Product Description
ShowMatch loudspeaker systems are compatible with the ShowMatch Tour Rack, which is available in 120-volt and 230-
volt versions. The ShowMatch Tour Rack is a fundamental system building block and has been engineered to support a
variety of system configurations.
US rack
European rack
ShowMatch Tour Rack Configuration
The ShowMatch Tour Rack ships ready to power a ShowMatch system with input routing and loudspeaker processing
preconfigured, allowing for "plug and play" operation for a system.
Input Priority and Routing
The system is preconfigured to auto-detect signal at the analog, AES and Dante® input points and will automatically
switch to the backup when input signal is lost. The PowerSoft X4D platform offers four input-signal-detection points:
Analog, AES, Dante Ch. 1-8, and Dante Ch. 9-16. Default input routing is configured for a basic system setup comprised
of Left, Right, Sub, and Fill input signals.
The following charts describe the input priority and routing that is preconfigured within the ShowMatch Tour Rack:
Input Priority
Priority
Input
1
Analog
2
AES
3
Dante Ch 1-8
4
Dante Ch 9-16
Mode:
Auto Detection
Initial System Configuration
The initial system configuration is for a stereo system comprised of two six-module arrays with a total of 8 SMS118
subwoofers. A PowerSoft ArmoníaPlus project file is available for download at
www.Armonia.powersoft.it/download-Armonia/, which can be used to control the operation of the ShowMatch Tour
Rack. If the file is not available, connecting to the system will provide full operational control, however the devices
shown in the Design workflow will not be present.
NOTE: System outputs are muted in the initial configuration of the ShowMatch Tour Rack. Outputs can be unmuted
using the ArmoníaPlus software or by pressing the channel mute/unmute on the front panel of the PowerSoft X4D
amplifier. See the PowerSoft X4D Owner's Manual for additional details.
PRO.BOSE.COM
Each ShowMatch Tour Rack includes:
Power Distribution Unit
Three (3) PowerSoft X4D amplifiers
Cisco SG350-28 Managed Network Switch
AES Splitter & Signal Distribution Unit
Loudspeaker Distribution Unit
Routing
System
Input Channel
Left
1
Right
2
Sub
3
Fill
4
23
Advertisement
Table of Contents
