Removing The Stand - Panasonic KX-HNC800E Installation Manual

Appendix
Removing the
stand
1
Hold the camera upside down
and adjust the angle of the
stand as shown.
2
Insert a thin, non-metallic
object into the groove on the
bottom of the camera body,
and then remove the stand by
rotating its base as shown.
32
HNC800E_(en_en)_0222_ver.101.pdf
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
32
Attaching the stand
Insert a thin, non-metallic object
into the groove on the bottom of
the camera body, and then attach
the stand by rotating its base as
shown.
2017/02/22 13:28:39