Information about
night vision mode
The camera features an array of
infrared LEDs that light
automatically in low-light
conditions, allowing camera
images to be viewable even when
the surrounding area is dark.
Note:
R When night vision mode is
active, the colours in camera
images may appear different
from normal.
R When night vision mode is
active, the array of infrared
LEDs that surround the
camera's lens light up in a faint
red colour that can be seen in
the dark.
R If the camera is installed in front
of a window and points directly
at the window, images may be
poor when night vision mode is
active.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
HNC800E_(en_en)_0222_ver.101.pdf
31
Wall mounting
Drive two screws (not supplied)
into the wall, and then mount the
unit as shown.
31 mm
Screws
Note:
R Make sure that the wall and the
fixing method are strong
enough to support the weight of
the unit.
Adjusting the angle
Adjust the angle as desired.
Note:
R When adjusting the angle,
make sure the unit does not tip
over.
Appendix
A A
B B
31
2017/02/22
13:28:39