Technicalspecifications - Soleus Air MA-9000AH Owner's Manual

PROBLEM
Unit does not operate
Unit does not cool room
In dehumidifying mode, no
cool air coming out
"Water Full" indicator is
blinking
Noise or vibration
Water is leaking from unit
TECHNICAL SPECIFICATIONS
POSSIBLE CAUSE
Unit is unplugged
Drain bucket is full
Water bucket not installed
correctly
Air exhaust is clogged
Timer is on
There is a heating source in the
room
Temperature setting is too high Lower temperature setting
Air filter is dirty
Air exhaust is not installed
correctly
Room is too big or too much
ambient sunlight is reaching in
There is frost on the evaporator The unit will defrost
There is frost on the evaporator The unit will defrost
The water bucket is full
The water bucket is not
installed correctly
Surface is not level
Surface is not level
Drainage plug is loose
17
REMEDY
Securely plug receptacle into
the power outlet
Empty water bucket
Completely insert water bucket
Remove obstruction from
exhaust hose
Cancel the timer
Turn down or off the other
heating source
Clean or replace the air filter
Check the exhaust duct to
make sure that the hot exhaust
air is being vented out of the
room
This unit provides spot cooling
or cooling for a room no larger
than 300 square feet with
standard ceiling height
automatically and return to
operation afterwards
automatically and will return to
operation afterwards
Empty the water bucket
Completely insert the water
bucket
Place unit on a level surface
and away from obstructions
Place unit on a level surface
Make drain tube is properly
secured and plugged