Bernina ACTIVA 135 S User Manual page 9

8 Setting up the sewing computer
Accessories
foot control
•
instruction manual
•
power cable
•
warranty card
•
Accessory box
•
presser foot lifter
•
Standard accessories*:
4 bobbins (+ 1 in the capsule
in the sewing computer)
Selection of 130/705H needles
Seam ripper
Screwdriver
Angle key Torx
Screwdriver Torx
Lint brush
Seam guide
Compensating plate
3 spool discs
Foam pad
Oiler
Fabric cover
protects from dust and dirt
•
compartment for accessories
•
Lens Set: **
We recommend the use of the
BERNINA Lens Set for more
comfort when sewing.
Caution!
To avoid injury always attach
the protective cover of the
magnifying glass holder
when the magnifying glass is
not in use.
030529.52.04_0303_a135 a145_EN
Start-stop-unit**
B
A
* can vary from country to country;
see presser foot selection p. 33
** available as a special accessory
Please refer to the safety
instructions!
With the Start-stop-unit (SSU)
the start-stop-function can be
controlled by hand.
press start-stop-button A =
•
stitching starts
with the speed regulator B
•
the sewing speed can be
regulated by hand
to interrupt or stop sewing =
•
press start-stop-button A
again
Note:
If the foot control is connec-
ted with the sewing machine,
the Start-stop-unit is out
functions.
CFL **
Contrary to an ordinary bulb, the CFL
sewing light has a better illumination
and a longer life.
Caution:
Please note that a defective CFL
sewing light must ONLY be replaced
by an authorized technician. The
sewing computer must be brought
to an authorized BERNINA dealer!