Table of Contents
Advertisement
Power Module
The Power module, Figure 3, is the primary internal
power source for the Z-Max. To plug in the module,
insert the small ledge of the Power module into the
rear of the GPS receiver module housing first. This
will correctly align the module. Using the ledge like a
hinge, swing the module closed until the latch on the
Power module clicks into place. If you require
additional or backup battery power, external power
sources can be used in conjunction with the Power
module.
Figure 3 Power Module and Charger
6
Z-Max Surveying System Pocket Guide
Advertisement
Table of Contents
