Rotating /Mirroring The Design - Bernina Happy Voyager Resource Manual

Happy Voyager

Rotating /Mirroring the Design

18
Description of function
Rotate a design in single 1degree increments, 90
degree increments or in mirror image motions.
.
Select SETTING press SET to enter setting
menu.
To rotate by degrees: Using the arrow keys, ar-
row down to the angle option. Select SET to
choose. Use arrow keys up down to change
value. Select SET to accept change.
To rotate by 90 degrees or to mirror: Using the
arrow keys, arrow down to the Convert design
option. Select SET to choose. Use arrow keys up
down to change position of design. Select SET to
accept change.
Select ESC to exit back to MENU mode and Se-
lect ESC again to return to drive mode.