Table of Contents
Advertisement
Happy Voyager
Using the Trace Function
15
Description of function
The trace function is used to verify that the pattern
selected embroiders within the boundaries of the
attached hoop.
It is Very important to perform a TRACE before
sewing out a pattern !!!
Perform a trace by pressing the TRACE button.
The frame (Hoop) begins tracing the pattern
(Design) within the hoop.
Visually observe the hoop and the front/back of
presser foot and check to make sure the presser
foot is within the perimeter of the attached hoop.
1024
Once the trace is done, the stitches count of 1024
stitches is displayed.
To perform a 2nd trace, select FUNCTION, Top
and select TRACE.
Advertisement
Table of Contents
