Denon RCD-M38 Service Manual page 20

4.3 Pickup movement
(1) In the stop mode, pickup moves in REV (inwards) or FWD (outwards) direction when 8 / - or + / 9 button
pressed.
(2) When 8 / - button pressed, move to stop operation after detection that inner switch has turned on.
(3) Pickup movement stops when button released.
4.4 Stop
(1) When STOP 2 button is pressed, play operation and servo stop.
(2) After stopping, conduct reading of auto adjust values.
4.5 All servo on
• When SDB/TONE button is pressed, the adjustment values are displayed in the following order.
" 1 3 "
4.6 Adjustment value display
(1) When DIRECT button is pressed, the adjustment values are displayed in the following order.
q FOCUS BALANCE
" 1 3 "
X X X X
F O C U S
w FOCUS GAIN
" 1 3 "
X X X X
F O C U S
e TRACKING BALANCE
" 1 3 "
X X X X
T R A C K I N G
r TRACKING GAIN
" 1 3 "
X X X X
T R A C K I N G
t FOCUS OFFSET
" 1 3 "
X X X X
F O C U S
y TRACKING OFFSET
" 1 3 "
X X X X
T R A C K I N G
@ @ Tr X X : X X
( 1 , 3 flashing / @@:T.No / XX:XX:Time)
B A L A N C E
( 1 , 3 flashing / XXXX:Adjustment value)
G A I N
( 1 , 3 flashing / XXXX:Adjustment value)
B A R A N C E
( 1 , 3 flashing / XXXX:Adjustment value)
G A I N
( 1 , 3 flashing / XXXX:Adjustment value)
O F F S E T
( 1 , 3 flashing / XXXX:Adjustment value)
O F F S E T
( 1 , 3 flashing / XXXX:Adjustment value)
20