Table of Contents
Advertisement
* Line Cords: North American; Nema L6-30P Twist and Lock Plug
The floor area at the installation site must provide enough space and stability to
support the weight of the cabinet when installing and servicing the cabinet and its
trays. Ensure sufficient ventilation provides a free flow of air to the cabinet.
TABLE 2-1
tall 19" rackmount cabinet. Your customer-supplied cabinet should be a similar size
in order to follow the same stack-up and cabling scheme used in a standard Sun
Rack installation.
TABLE 2-1
Height
74 in.
(188 cm)
Cabinet Parts
The typical fixed cabinet parts (components) are:
Cabinet chassis
Front and rear covers (as needed)
Two or four 30 amp Power Distribution Units (PDU)
A North American or International styled power cord
Various numbers of rails depending on devices installed
Four shock-absorbing castors
One set of wheel chocks.
8
Sun StorageTek 6540 Rack Ready Site Preparation and Installation Support Guide • July 2006
12 Outlets (IEC 320 C)
Two 20 Amp Circuit Breakers per PDU, 4 total
protects six outlets each (rated at 16 amps max.).
Line Cord* for each 30 amp PDU (quad configuration):
Volts: 200-240 Frequency: 50-60 Hz
Amps: 48 Max Phase: Single
24 Outlets (IEC 320 C)
Two 20 Amp Circuit Breakers per PDU, eight total
protects six outlets each (rated at 16 amps max.).
or International; Connector-ready
provides the physical dimensions and weight of a typical EIA-compliant
Cabinet Dimensions and Weight Specifications
Width
23.5 in.
(59.7 cm)
Depth
Empty Weight
39.4 in.
360 pounds
(1000 mm)
(163.3 kg)
Advertisement
Table of Contents
