How To Operate By Remote Control - McIntosh C2300 Owner's Manual

How to use the Remote Control
The supplied HR073 Remote Control is capable of
directly controlling the functions of contemporary
McIntosh Source Components connected to the C2300
via the Data Ports.
Note: If at any time the C2300 seems unresponsive to
HR073 Remote Control Commands press the
Push-button first.
Input Source Selection
Press the appropriate Source Push-button to select the
desired program source. Sources may also be selected
by pressing the ◄INPUT► push-button.
Mute
Press the MUTE Push-button to mute audio. The
Record Signals present at the SRVR REC OUTPUT
Jacks are not affected by the MUTE function. The
C2300 Front Panel Alphanumeric Display will indi-
cate the word MUTE.
Note: For additional information on the various Mute
Modes refer to page 18.
Mode
Press the MODE Push-button to switch from Stereo to
Mono for Monophonic listening.
Disc, Server and Tape Functions
Use these push-buttons to operate a DVD Player, CD
Player, CD Changer, Music Server or Recorder.
Numbered Push-buttons
Press Push-buttons 0 through 9 to access tuner sta-
tion presets, tracks on discs or selections on a Music
Server.
Disc and Track
Use the AM(disc)and FM(track)Push-buttons when a
Disc Player or Music Server is being used.
Tuner Push-buttons
Press the AM or FM Push-button to select the de-
sired broadcast band. Press and release the Seek
Seek Push-button to seek the next available station.
8
Press and hold a Seek or Seek
7 8
continuously from station to station.
Volume
Press the VOLume + or - Push-button to raise or lower
the listening volume level.
Note: The Record Signals present at REC OUTPUTS are
not affected by volume changes.
Pause
Press the Pause Pushbutton to perform various func-
tions on a variety of McIntosh Components. It will
also pause the playing of a disc or tape player.
Trim
Press the TRIM Push-button until the word "BAL-
ANCE __" appears on the Alphanumeric display,
then press the LEVEL + Push-button to emphasize the
Left Channel or LEVEL - Push-button to emphasize
the Right Channel.
Press the TRIM Push-button until the word "TRIM
_ _ _ _ _" appears on the Alphanumeric display, then
press the LEVEL + or - Push-button to match the vol-
ume level of the previously selected Input.
Note: For additional information on the other Trim Fuc-
tions refer to pages 16, 17 and 18.
Acc On/Off
Press ACC ON to turn the power ON or ACC OFF
switches AC Power OFF to McIntosh Components
when connected to the ACC Power Control Jack.
Amplifier Selection
or Press the BLUE (Setup) Push-button followed by the
7
AM (Output 1) or FM (Output 2) Push-buttons, to con-
Push-button to seek trol the rear panel OUTPUTS 1, 2 (ON or OFF). These
OUTPUTS provide signals to a Power Amplifier or
other accessory component.
How to use the Remote Control
15