Switching Between Raw And Lpr - Canon Color Network UFR Printer Kit-C1 Quick Setup Manual

1.11 Switching Between RAW and LPR

Switching Between RAW and LPR
1) Make the following selections: start>Control Panel>Printers and Other Hardware>Printers and Faxes>printer to
open (right click)>Properties>Ports (tab)>(select the desired item; the currently selected printer is
checked)>Configure Port.
2) Specify either operation for RAW procedure under [Raw] and [LPR] within [Protocol] or operation for LPR.
< RAW >
- Type '9100' for [Port Number].
RAW Setting
F-1-78
< LPR >
- Type 'lp' for [Queue Name] in the case of an iR C6800.
- Make the appropriate setting for [LPR Byte Counting Enabled].
- Type appropriate settings for [SNMP Status Enabled], [Community Name] and [SNMP Device Index] within the
item.
50
0006-2909