Collecting Information Before Making Settings - Canon Color Network UFR Printer Kit-C1 Quick Setup Manual

1.4 Collecting Information Before Making Settings

<iR C6800>
1) Find out the IP address that has been set to the printer:
1. turn on the power.
2. click [Ad Func].
3. click [System Settings].
4. click [Network Settings].
5. click [TCP/IP Settings].
6. click [IP Address Settings].
(When you have found out the IP address, click [Cancel] to end.)
Checking and Setting the IP Address
F-1-2
2) Use the IP address when setting up the network connection on the PC later.
Check the Settings Made on the iR C6800 by Printing a User Data List
- make the following selections: Ad Func>Report Settings>Network>User's Data List>Yes
- see that a user data list (network) has been printed.
Note:
You can also check the IP address using the printed data list.
If no IP address has been set, set it on the control panel, and click [OK].
After making the selections, turn off the power, turn off the main power, and then turn on the main power.
0006-2901
5