1.9 Installing Canon LPR2
If you are using standard TCP/IP port, you need not install Canon LPR2
If the limits imposed by the user environment preclude the use of the standard TCP/IP port and, as a result. you need
to select Canon LPR2, install it as follows:
1) Set the User Software CD-ROM in the CD-ROM drive. When the UFR CD-ROM Setup screen has appeared, click
the close box to close the screen.
Note:
If the UFR CD-ROM Setup screen does not appear when you have set the User Software CD-ROM, go to step 2).
2) Click [start] and then [My Computer].
F-1-53
3) Double-click the CD-ROM drive.
Double-click the SETUP.EXE icon in the LPR port folder.
36
0006-2906