Canon Color Network UFR Printer Kit-C1 Quick Setup Manual page 14

3) Obtain the RAW setting of the printer:
1. turn on the power.
2. click [Ad Func].
3. click [System Settings].
4. click [Network Settings].
5. click [TCP/IP Settings].
6. click Downward arrow button.
7. click [RAW Settings].
8. check to see that the notation is [On].
(After making the check, click [Cancel] to end.)
Checking and Setting RAW
F-1-3
- If the notation of [RAW Settings] was [Off], click [On] then [OK] to change the setting.
Note:
Leave [Use Bidirectional] as it is.
- hen you have changed the settings, turn off the power, turn off the main power, and then turn on the main power.
<Windows PC>
Opening Properties for the Network Connection
Windows XP Display
standard at install at time of category display
- start>Control Panel>Network and Internet Connections>Network Connections>any connection name (here,
Local Area Connection)>Properties.
6