Exit Navigation - Cobra 8500 PRO HD User Manual

Traffic section for more information.

Exit navigation

Exit
Tap the [Exit] button to completely close the navigation application.
Bluetooth
1.Power on the unit and press "MODE" button to change to bluetooth mode or press "BT" button on the remote,
the LED display will display "bt".
2.The previous paired device will connect to the device automatically when each time changing to bluetooth mode.
3.Press play/pause button and hold for 10 seconds, after a beep tone, the device is prepaired to be paired again.
4.Search "HKN" and pair it, input the password "0000" if necessary.
5.If it still doesn't work, please reset the Bluetooth and follow above step again.
Notes:
1.When the bluetooth icon on the display flashes, means the device is searching the previous paired device.
2.Press play/pause button and hold for 10 seconds, the bluetooth icon on the display will flash fast, which means
the device is ready for being paired.
3.After paired sucessfully, the bluetooth icon on the display will be on.
WIFI
This device supports "Wi-Fi 802.11 b/g/n". You can access to the local network through WiFi. About WiFi settings
and operations, please refer to the WiFi section in System Settings.
69 | P a g e
Exit the navigation application.
8 5 0 0 P R O H D U s e r M a n u a l