Bosch Motorsport
CW_EM_xxx
0
1
2
3
The single error bits may be collected in the error monitor.
9.3 Error Memory Properties
The following property is available for the error memory itself.
CLRERRMON
Error Status /device measurement label error_state
0
1
2
If displayed in a measurement sheet, this property value (0, 1 or 2) is translated into a
verbal description.
Engine_Control_Unit_MS_6.x_Manual
Individual error related to a function
Error will not be stored in the monitor
Error is stored in the monitor
Not valid
Error is stored in the monitor and the MIL condition is
switched on
Reset of the error monitor
No error present in the memory
At least one inactive error present in memory, no active er-
rors
At least one active error present in memory
Error Memory | 9
71 / 76