Bosch MS 6 Manual page 60

7 | CAN Configuration
7.2.6 Online view of CAN channels in vehicle
60 / 76
1. Double-click on 'Sheet 1' in Project Tree. Measurement Sheet 1 is displayed in Main
Area.
2. Click on 'Measurement elements' in the Toolbox.
3. Drag the desired Measurement element (e.g. Numeric Indicator) and drop it on the
Measurement Sheet.
4. Click on folder 'CAN Input' of desired CAN bus to display available channels.
5. Drag desired Measurement channel and drop it on the Measurement element.
Engine_Control_Unit_MS_6.x_Manual
Drag + Drop
Bosch Motorsport