Installing Or Replacing The Batteries - BenQ PB8260 User Manual

Installing or Replacing the Batteries

Push and open the
1
battery compartment
lid in the direction
shown.
• Avoid excessive heat and humidity. There may be danger of damage to the remote and
injury to those nearby if the batteries are incorrectly replaced.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of the used batteries according to the manufacturer's instructions.
• Never throw a battery into a fire.
• If the batteries are dead or if you will not be using the remote control for a long time,
remove the batteries to prevent battery acid from leaking into the battery compartment.
12 Introduction
Install batteries as
2
indicated by the
diagram inside the
compartment.
Position the lid over
3
the compartment
and snap it back
into place.