Correcting Keystone - BenQ PB8260 User Manual

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of
the projector, you will need to manually correct
it following ONE of these steps.
A. Press 3 Left/ Right 4 (hot key) on the
control panel of the projector to display the
status bar labelled Keystone. Press Right 4to
correct keystoning at the top of the image. Press
3 Left to correct keystoning at the bottom of
the image.
B. Press 3 Keystone/ Keystone 4 on the
remote control to display the status bar labelled
Keystone. Press Keystone 4 to correct
keystoning at the top of the image. Press 3
Keystone to correct keystoning at the bottom of the image.
C. Press Menu key on the projector or the remote control. Go to
and adjust the values by pressing 3 Left/ Right 4 on the projector or 3 Keystone/
Keystone 4 on the remote control.
Keystone
Keystone
Fine-tuning the image size and clarity
1. Adjust the projected image to the size
that you need using the zoom ring.
Refer to the screen size tables on page 21.
22 Operation
4
1. Press Right on the projector or
4
2. Press Keystone on the remote control
or
4
3. Press Right on the projector or
4
Keystone on the remote control when you
are in Display --> Keystone menu.
0
3
1. Press Left on the projector or
3
2. Press Keystone on the remote control
or
3. Press 3 Left on the projector or 3
Keystone on the remote control when you
are in Display --> Keystone menu.
0
Display --> Keystone
Keystone
Keystone
2. Then sharpen the image by rotating
the focus ring.
+16
-16