Maintenance; Cleaning And Maintaining The Cam; After Using The Cam; Mantenimiento - Samsung SC-M2050S Owner's Instruction Book

Hide thumbs Also See for SC-M2050S:
Table of Contents

Advertisement

Maintenance:

ENGLISH

Cleaning and Maintaining the CAM

After using the CAM

✤ For the safekeeping of the CAM, follow these steps.
✓ Turn the CAM off.
✓ Remove the Battery Pack (refer to page 19).
✓ Remove the Memory Card (refer to page 33).
✤ To prevent any damage to the LCD monitor, do not apply
excessive force on its moving parts.
✤ Do not drop or in anyway shock the CAM.
✤ For prolonged use of the CAM, avoid using it in places subject to
excessive humidity or dust.
✤ Do not leave the CAM in places subject to:
✓ Excessive humidity, steam, soot or dust.
✓ Excessive shock or vibration.
✓ Extremely high (over 50°C or 122°F) or extremely low (under 0°C
or 32°F) temperatures.
✓ Strong electromagnetic fields.
✓ Direct sunlight or in a closed car on a hot day.
✤ For the safe use of the Battery Pack, follow these.
✓ To conserve battery power, be sure to turn off the CAM when not in
use.
✓ Battery consumption may vary depending on the condition of use.
Recording with many starts and stops, frequent zooming, and
recording in low temperatures will shorten actual recording times.
✓ Dispose of used Battery Packs promptly.
Do not dispose of them in fire.
✓ The Battery Pack will become warm during charging and use. This
is not a malfunction.
✓ The Battery Pack has a limited service life. If the period of use
becomes noticeably shorter with a normal charge, the Battery Pack
is at the end of its service life. Replace it with a new Battery Pack.
✤ For the safe use of the Memory Card, follow these.
✓ The Memory Card should be stored away from heaters and other
heat sources. Avoid storing Memory Cards under direct sunlight
and avoid electromagnetic fields.
✓ Do not power off any devices while transferring data, as this may
destroy the data.
✓ Back up your image data often to a hard disk or other permanent
storage media.
✓ Format the Memory Card periodically.
✓ When formatting the Memory Card, format in the CAM.

Mantenimiento:

Limpieza y mantenimiento de la CAM

Después de utilizar la CAM
✤ Para una conservación correcta de la CAM, siga estos pasos.
✓ Apague la CAM.
✓ Retire la batería (consulte la página 19).
✓ Retire la tarjeta de memoria (consulte la página 33).
✤ Para evitar daños en la pantalla LCD, no aplique fuerza excesiva
en sus partes móviles.
✤ No deje caer ni golpee la CAM.
✤ Para el uso prolongado de la CAM, evite utilizar lugares expuestos
a humedad excesiva o al polvo.
✤ No deje la CAM en lugares expuestos a:
✓ Humedad, vapor, hollín o polvo excesivos.
✓ Choques o vibración excesivos.
✓ Temperaturas extremadamente altas (por encima de 50°C o 122°F)
o extremadamente bajas (por debajo de 0°C o 32°F).
✓ Campos electromagnéticos potentes.
✓ Luz solar directa o vehículos cerrados en días calurosos.
✤ Para el uso seguro de la batería, siga estas recomendaciones.
✓ Para conservar la alimentación de la batería, asegúrese de apagar
la CAM cuando no se utilice.
✓ El consumo de la batería puede variar dependiendo de las
condiciones de uso. Las grabaciones con muchas interrupciones,
uso frecuente del zoom y con temperaturas bajas acortará los
tiempos de grabación normales.
✓ Deshágase de las baterías utilizadas de la forma adecuada. No las
arroje al fuego.
✓ La batería puede calentarse durante su recarga y uso.
Este hecho es normal y no se trata de ningún defecto.
✓ La batería tiene una vida de servicio limitada.
Si el tiempo de uso se va reduciendo de forma notoria con una
carga normal, es indicio de que la batería está llegando al final de
su vida de servicio. Sustitúyala por una nueva batería.
✤ Para el uso seguro de la tarjeta de memoria, siga estas
recomendaciones.
✓ La tarjeta de memoria debe mantenerse lejos de calefactores y
otros generadores de calor. Evite dejar las tarjetas de memoria
bajo la luz directa del sol y evite campos electromagnéticos.
✓ No apague ningún dispositivo mientras transfiere datos, ya que
podría destruirlos.
✓ Haga una copia de las imágenes en un disco duro o en otro
soporte de almacenamiento permanente.
✓ Dé formato a la tarjeta de memoria periódicamente.
✓ Al formatear la tarjeta de memoria, hágalo en la CAM.
ESPAÑOL
121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-m2050bSc-m2100sSc-m2200bSc-m2100bSc-m2200s

Table of Contents