English
3
BREWER OPERATING INSTRUCTIONS
Check
connection to the water
supply system before using
the brewer.
With the lid to the internal hoppers open, lift the lids off
both the milk powder hoppers and fill them until reaching
the maximum level.
Switch on the brewer by pressing the power ON/OFF
switch.
12
the
correct
HYDRAULIC CIRCUIT FILLING:
When installing the brewer for the first time after a
prolonged downtime or maintenance operations, run a
brew cycle by placing a cup or mug on the drip tray plate
and dispensing water (12 oz drink) without inserting a
K-Cup® pod.
When the dispensing nozzle starts to dispense water, the
water circuit is filled.
Failure to follow these
instructions may damage
the
brewer
exempt the manufacturer
from
any
regarding
working conditions. When
using the brewer for the
first
time,
recommended to dispense
a 12 ounce drink without a
K-Cup® pod.
and
will
responsibility
the
brewer
it
is