Page 1
Slim + ICED ® ™ Use & Care Guide Get the most from your new Keurig brewer ®...
Page 2
Before You Brew Plug & Place Rinse & Fill BREW OVER Remove packing tape from brewer. Remove the water reservoir lid, then lift the reservoir straight up Plug into a grounded outlet. Place to remove it. mug on drip tray. Rinse reservoir with fresh water NOTE: The brewer will automatically turn off after and fill to the MAX FILL line.
Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning. Brewer Exterior Water Reservoir Keep your Keurig® brewer looking its The water reservoir should be best by cleaning the exterior from cleaned periodically by wiping the time to time.
• Turn off and unplug the brewer. Place a large mug on the drip tray. To activate Descale • If there is Keurig® Descaling Solution in the water reservoir, discard the Mode, begin with the brewer powered off by pressing...
Click or Call! Helpful Hints Have Questions? We’re here to help. Visit Support.Keurig.com for Water quality varies greatly. If you notice an undesirable taste in your beverage (such as chlorine or mineral tastes), step-by-step videos on cleaning, descaling, and more.
God. that you register your brewer on keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its OTHER LIMITATIONS option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase.
Page 7
Coffeehouse taste in your own home. FIND YOUR PERFECT POD With over 75 brands and hundreds of varieties, find your match at Keurig.com/New DC0000008345 REV A...