Double Exposure - Canon PELLIX QL Instructions Manual

Double Exposure
Under ordinary usage, there is no danger of
double exposure. However, double exposure
can be made by the following steps:
When the first exposure has been made.
1
press the rewinding button.
Rewind the film with the rewinding crank
2
by watching the mark on the rewinding
button carefully.
Stop rewinding when the mark has made
3
3/4 turning, i. e., 270.. Be sure not to
exceed one turn of the rewinding button.
Next, wind the film advance lever while
4
lightly holding the rewinding crank. When
resistance is felt on the rewinding crank, stop
the winding.
Wind the film advance lever once more.
5
By repeating the above process,
it
is
possible to make any number of exposures
on the same film plane. The film counter
will, however, continue to advance with each
exposure.