Table of Contents
Advertisement
I
E x p o c ~ ~ ~ r
S ~ t t i n e 2
-
F Stop Priority Method
q]
Set the lens aperture a t the deslred
F
stop.
Face the camera towards the photo-
graphic subject. look into the viewfinder,
and press the CdS actuating lever.
While pressing or locking the CdS actu-
3
ating lever, turn the shutter dial.
Set the meter needle at the o index
4
within
the
viewfinder
for
correct
exposure.
*
Intermediate positions on the shutter speed
dial scale cannot be used, but since any aper-
ture may be utilized, the shutter speed should
first be determined when strictly considering the
exposure.
It is most practical t o adjust the
aperture according t o this.
i
During the use of the meter, there are
instances Of the movement of the needle be-
coming slack, owing to changes in the degree
of light, but this is due to the characteristics
of tKe
C ~ S .
*
When taking pictures against light, always
use a lens hood.
*
When the subject is too bright or too dark
and is outside the coupling range of the built-in
exposure meter, the meter needle will point to
the top of the viewfinder and will indicate that
proper exposure cannot be obtained.
Refer to
"Coupling Range of Built-in Exposure Meter"
on the following page.
Hide quick links:
Advertisement
Table of Contents
