Table of Contents
Advertisement
'F
. ,
.
'.,~% f
Coincide
its:
.
,
" P
~:
- " ?
and
remove.
colnclde the red
dot
and
guide
Pln.
P r r i .
,
. " * ,
Uses of Lenses
Changing Lenses
* T h e r e
is
a
pre-set aperture lever at the
back end of the lens which opens and closes
In removing the lens from the camera, after
the aperture.
when the lens
is
removed, be
turning the bayonet ring of the lens to the left,
sure
to always put
on the dust
cap
so a s
to
take out the lens.
protect the aperture lever.
In mounting the lens' match
the red
dot
Of
the
If interchangeable lenses are changed while
lens to the red dot on the camera mount. Turn
the CdS actuating
is in locked position,
the bayonet ring to the right and fasten.
the preset aperture lever cannot be connected
When mounting, turn the bayonet ring of
t o the coupling part on the camera body and
the lens sufficiently to the left and coincide the
the pre.set aperture will not function.
Be sure
red dot and guide pin of the lens.
to unlock the CdS actuating lever when chang-
e
Do not change your lens
in a
strong light.
ing interchangeable lenses.
When changing your lenses
have
the replace-
*
Do
not
touch the pellicle mirror or the cou-
ment lens a t hand. Then quickly change the
pling section of the aperture.
When not in Use
lenses in the shade..
.
or use your shadow as
for a long time, protect the pellicle mirror by
a shield from direct light.
putting on the flange cap.
31
Hide quick links:
Advertisement
Table of Contents
