Nikon Coolpix A1000 User Manual page 225

6
Press and hold (for at least 3 seconds) the power button on the
remote control.
Pairing starts for the camera and remote control. During the process, the status
lamp on the remote control flashes about every 0.5 seconds.
When pairing is complete, a connection is
established between the camera and the
remote control. When you enter shooting
mode, M is displayed on the shooting screen.
If a pairing failure message is displayed,
perform the procedure again from step 5.
Switching the Connection to a Smart Device
Switch the connection from Remote control to Smart device in Choose
connection in the camera network menu (A158, 210).
When the SnapBridge app is launched on your smart device, and a connection is
established between the camera and smart device, L is displayed on the shooting
screen.
When establishing a wireless connection with a smart device for the first time, see
the included "SnapBridge Connection Guide".
Technical Notes
Accessories
211
1 0 0 1 0 0 1 / 2 5 0 1 / 2 5 0 F 3 . 4 F 3 . 4
0 . 0 0 . 0
2 5 m 0 s 2 5 m 0 s
5 0 0 5 0 0