1 Set up of the controller
Press
+
SET
Character
Name , Functions and Setting range
Protocol Selection
Communication Bits
ID Number
Range : 0 ~ 255
Communication Baud rate
: 2400 bps
: 4800 bps
: 9600 bps
: 19200 bps
: 38400 bps
When parameter
again. Otherwise, no communication is performed by using the changed value.
FY400/600/700/800/900 COMMUNICATION MANUAL
key 3 seconds to configure parameters in Level 3
: MODBUS RTU Protocol
: MODBUS ASCII Protocol
: TAIE Protocol
: Odd parity , Data bits = 8 , Stop Bit = 1
:Odd parity , Data bits = 8 , Stop Bit = 2
: Even parity , Data bits = 8 , Stop Bit = 1
: Even parity , Data bits = 8 , Stop Bit = 2
or
1 Set up of the controller
was changed, always turn on the power
Default
1