Application Manager - Nokia N71 User Manual

R1114_en.book Page 93 Tuesday, January 24, 2006 2:04 PM
Tools > Voice com. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
Tip! Alternatively, to define the side key to use voice
commands, see 'General', p. 83.
To add more applications to the list, select
application. To add a second voice command that can be
used to start the application, select
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select
Playback.
To change voice command settings, select
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesizer
recognition learning (for example, when the main user of
the device has changed), select Reset voice

Application manager

Press , and select Tools > Manager. You can install two
types of applications and software to your device:
• J2ME™ applications based on Java technology with the
extension .jad or .jar (
in the standby mode, • Other applications and software suitable for the
Symbian operating system (
have the .sis extension. Only install software
specifically designed for your Nokia N71. Software
providers will often refer to the official model number
of this product: the Nokia N71-1.
Options > New
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
Options > Change
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
Options >
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a compatible memory card (local disk).
Options >
Install applications and software
> Off. To reset voice
indicates a .sis application,
that the application is not fully installed, and
adapts..
that the application is installed on the memory card.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Before installation, note the following:
).
). The installation files
a Java application,
93