Voice Commands - Nokia N71 User Manual

R1114_en.book Page 92 Tuesday, January 24, 2006 2:04 PM
Network
Operator selection—Select Automatic
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
In the standby mode, indicates a compatible headset
is connected, and that the headset is unavailable, or
a Bluetooth connection to a headset is lost.
92
a compatible loopset is connected,
connected, and
Select Headset, Loopset, TTY,
to set the device
Car kit
Default
each time you connect a certain enhancement to your
device. See 'Profiles—set tones', p. 79.
Automatic
an incoming call automatically after 5 seconds. If the
Ringing type is set to
answer is disabled. Automatic answer is not available for
TTY.
If you are using a TTY, you must activate it on your device.
Press
TTY >
to set the device to indicate
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see 'Voice dialing', p. 49.
To activate enhanced voice commands for starting
applications and profiles, you must open the
indicates
application and its
that a
that a car kit is connected.
Bluetooth handsfree, or
and from the following:
profile—Set the profile that you want activated
answer—Set if you want the device to answer
Beep once or Silent, automatic
, and select Tools > Settings > Enhancement
Use TTY > Yes.

Voice commands

Profiles folder. Press , and select
TTY is
>
Voice com.