Sony SRS-XB10 Help Manual page 68

If no ring tone is heard via the speaker, the speaker may not be connected with a BLUETOOTH mobile phone with HFP or
HSP. Check the connection status on the BLUETOOTH mobile phone.
Adjust the volume by pressing the –/+ (volume) buttons on the speaker or operating the BLUETOOTH
3
mobile phone.
When you press the –/+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH mobile phone, the
(BLUETOOTH) indicator flashes once in white.
When you set the volume to the maximum or minimum level on the speaker, the
in white.
To end a call, press the
4
If you were listening to music before the call, playback will resume when the call ends. If you end a call by operating the
BLUETOOTH mobile phone, playback will also resume when the call ends if you were listening to music before the call.
Hint
Some BLUETOOTH mobile phones have handset use priority when receiving a call. In the case of the HFP or HSP connection, switch the call
device to the speaker by operating your BLUETOOTH mobile phone.
The volume of music playback and calling is set independently in the speaker.
If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.
Note
(play) button.
(BLUETOOTH) indicator flashes 3 times
63