Sony SRS-XB10 Help Manual page 33

2.
Select [SRS-XB10] and click [Next].
*
If a passkey is required, enter "0000."
If [SRS-XB10] does not appear, perform the operation again from step
*
A passkey may be called "Passcode," "PIN code," "PIN number," or "Password."
3.
When the following screen appears, click [Close].
The computer begins installing the driver.
The " " mark will appear in the bottom left of the [SRS-XB10] icon during installation. When the "
disappears, driver installation is complete. Proceed to the next step (substep 4).
.
" mark
28