Switching Devices By One-Touch (Nfc) - Sony SRS-XB10 Help Manual

Help Guide
Wireless Speaker
SRS-XB10

Switching devices by One-touch (NFC)

If you move an NFC-compatible device over the N marked part of the speaker while the speaker has been connected with the
other BLUETOOTH device, the speaker disconnects from the BLUETOOTH device, then connects with the NFC-compatible
device that was just touched. However, if you are talking on a BLUETOOTH mobile phone connected to the speaker, you
cannot switch the BLUETOOTH connection by One-touch.
When you touch an NFC-compatible device that has been connected with the speaker via the BLUETOOTH connection on
another NFC-compatible BLUETOOTH headset or BLUETOOTH speaker, the NFC-compatible device disconnects from the
speaker and connects with the BLUETOOTH device it just touched.
If you cannot switch devices, try the following.
Move the NFC-compatible device slowly over the N marked part of the speaker.
If the NFC-compatible device is in a case, remove the case.
4-694-214-11(3) Copyright 2017 Sony Corporation
20