Preparing Your Computer For Wireless Connection - BenQ Commuter CP120 User Manual

Preparing your computer for wireless connection

Checking the TCP/IP settings of your computer
In order for the projector to connect to your computer successfully, your computer must
allow automatic IP and DNS address assignment in TCP/IP settings. Follow the steps below
to check if the TCP/IP settings of your computer are correctly set.
1. Right-click the Wireless connection
View Available Wireless Networks in the menu that appears.
2. The Wireless Network Connection window will pop up. Click Change advanced
settings to continue.
3. In the window that follows, click Internet Protocol (TCP/IP) and then the Properties
button.
icon on Windows Taskbar, and then select
Using the projector 29