Remote Control Description - BenQ Commuter CP120 User Manual

Remote control description

1. Power (Refer to
mation)
Turns the projector on or off.
When the projector is in standby, press once to turn the projector on.
When the projector is on, press twice to switch the projector to standby.
2. Freeze
The image is frozen when Freeze is pressed. An icon "
right corner of the screen.
To release the function, press Freeze again or the Source button.
5Up,6Down
3.
3Left, 4Right
4.
When the on-screen menu is activated, the Up/Down/Left/Right buttons are used as
directional arrows to select the desired menu items and to make adjustments.
5. Menu (Refer to
Turns on the On-Screen Display (OSD) menu.
6. Auto keystone
Automatically corrects distorted images resulting from an angled projection.
7. Keystone
Manually corrects distorted images resulting from an angled projection.
8. Page Up and Down
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing
Down on the remote control
9. Wireless
Press this button to display the Wireless Connection menu.
10. Swap (Refer to
When the Wireless Connection menu is displayed, press this button to change the
wireless connection mode between 802.11 a and 802.11 b/g.
10 Introduction
1
2
3
4
5
3
6
7
"Start up" on page 21
"Using the menus" on page 37
(Refer to "Correcting keystone" on page 25
.
"Making wireless presentation" on page 30
8
9
10
11
12
13
14
15
"Shutdown" on page 27
and
" will display in the lower
for more information.)
for more information.)
for more information.)
for more infor-
Page Up and Page