Table of Contents
Advertisement
Shutdown
1.
Press Power and a warning message
appears. Press Power a second time
to turn the projector off.
2.
The Power indicator light flashes
orange and the lamp shuts down, the
fans continue to run for
approximately 110 seconds to cool
down the projector.
To protect the lamp, the projector will not
respond to any commands during the
cooling process.
3.
Disconnect the power cord from the
wall socket.
Do not unplug the power cord before the projector shutdown sequence is complete or during
the 110-second cooling down process.
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the
projector within hours, the fans will run for a few minutes to cool down. Press Power again to
start the projector after the fans stop.
22
Operation
Advertisement
Table of Contents
