Preparations
Connecting to PC
Install a USB driver only if the operating system is Windows 98SE / ME.
Removing the device from the PC
1
When removing NVX216 from the PC in Windows ME / XP / 2000, (
in the Windows status bar to stop and remove the device.
2
When the [Safely Remove Hardware] window appears, you may disconnect the USB cable.
8
) click [Safely Remove Hardware]
Power On/Off, Hold Switch, and Resetting
Turning the power on
Note
The booting may take longer due to memory capacity.
Turning the power off
Hold switch and resetting
lock the unit and disable all the
buttons.
Preparations
Press the [
Press the [
seconds.
If a problem develops when using
the device, press the [RESET]
button to resolve the problem.
A hole appears after sliding the
Reset the device by pressing the
hole with the stylus pen.
9