Miele KWT 6321 UG Operating And Installation Instructions page 37

Display warnings
Message
A dash is lit up up/flash-
ing in the display.
F0 or F1 appears in the
temperature display.
The alarm is sounding
and the temperature
display is flashing.
Cause and remedy
Only temperatures within the range the wine condi-
tioning unit can display will be shown.
There is a fault.
 Call Service.
The temperature in the zone concerned has risen
higher or fallen lower than the temperature set.
This could be due to, for example:
– the appliance door being opened too often, or be-
ing left open,
– blocked ventilation gaps,
– a lengthy interruption to the power supply.
 Rectify the cause of the alarm. The temperature
display will stop flashing and the alarm will stop.
Problem solving guide
37