Table of Contents
Advertisement
Global Positioning Satellite Status Icon and Screen
GPS – The GPS symbol is placed at the top right corner of the screen. The color of this icon and the
number displayed have the following significance:
Red – A GPS receiver is not connected or the power supply is interrupted.
Orange + number of received satellites – A GPS receiver is connected, but the received
signals are not convenient for navigation purposes (for example, because you are in a tunnel).
Green + number of received satellites – The signals are convenient; navigation may
begin.
Tap the GPS icon to display the current GPS status:
GMT – Greenwich Mean Time (time in London, without daylight saving time).
Longitude /Latitude – current position; indication of east longitude and north latitude.
Satellites – Number of received satellites. At least three satellites must be received for navigation
purposes.
HDOP – Horizontal Dilution of Precision indicates the quality of position determination. Theoretically,
any value from 0 to 50 can occur. The smaller the value, the more accurate the position.
Speed – Indicates your vehicle's current speed.
Position – Indicates the address of your current position.
Save – Tap this button to add the current address to the saved destinations list.
Quit – Tap this button to exit the GPS screen.
Command Buttons with Caption
Command buttons – You will find command buttons with captions on almost every screen.
There are three groups of command buttons:
1. Command buttons with a defined functionality. These buttons are designed to
execute a functionality, which is indicated by their caption: Save, OK, Cancel, Select
map, One destination, etc.
2. Buttons to select one of two possibilities. Use these buttons to select one of two
options. The current state is indicated by the caption of the button: User mode, Yes-No,
On-Off. When you tap one of these buttons, the caption switches to the other possibility.
Confirm this change by clicking another button (OK or Save) before the current screen
closes.
3. Buttons to enter data. These buttons will be referred to as entry fields throughout this
guide. The caption is either your last entry or <please select>: City, Street, Category
(of a POI), etc. When you tap an entry field, another screen with a software keyboard, a
list, or with both of them opens where you can make your entries. Confirm this entry by
clicking another button (OK or Save) before the entry screen closes. Your entry becomes
then the caption of the entry field.
14
Advertisement
Table of Contents
