Selecting A Point Of Interest - Dual NavAtlas XNAV3500P Quick Start Manual

Selecting a Point of Interest

Points of Interest – also referred to as POIs – are stored in the database of places and may be
displayed on the map. Ports, airports, restaurants, hotels, gas stations, public buildings and others
belong to the Points of Interest. They may be selected as destinations for navigation purposes.
Point of Interest nearby
Note: You may only select points of interest nearby when the GPS receiver is turned on and when
the GPS signal strength is sufficient.
1. On the DESTINATION screen, tap Nearby.
The POI NEARBY screen opens.
2. Enter the radius around your current position within which you want to search for points of
interest into the Radius entry field.
3. Select the main category of points of interest to search for from the left one of the two Category
list fields, e.g., "Garage". Only points of interest situated within the indicated radius will be displayed.
4. Select the Subcategory of Points of interest to search for from the right one of the two
Category list fields, e.g., "General Motors", "Ford Mercury Lincoln", "Chrysler Dodge Jeep".
Note: If you leave the Subcategory field empty, all Points of Interest matching with the selected
main category will be listed in the Point of Interest list field.
5. Select the correct destination from the Point of Interest list field.
17