Backlight - American Dynamics ADLCD10PPS1WM User Manual

 Backlight
When there is a strong backlight behind the object, clear images of the background as well as the object
can still be obtained by using the BACKLIGHT function.
1. OFF : Not being used.
2. HLC (High Light Compensation) :
This function is used to suppress or mask a strong light source (for example, headlights of cars during
nighttime) so that other subjects can be seen in more detail. If you select HLC, a submenu appears
where you can make finer adjustments.
2-1 HLC LEVEL : Adjust the brightness level from which on the light source is to be masked out.
2-2 MODE : All DAY & NIGHT ONLY Selectable
2-3 BLC (Back Light Compensation) : This function is used to counter balance the screen image by
increasing the brightness so that a subject which appears dark due to a strong backlight can be
displayed in more detail. If you select BLC, a submenu appears where you can make finer
adjustments.
2-4 H-POS / V-POS / H-SIZE / V-SIZE : Define the position and size of the area of interest by changing
the position & size.
18