Functions Of Parts And Controls - Sony BVF-55 Operation Manual

Functions of parts and controls

8
7
6
1 G TALLY lamp (green)
Lights when the green tally signal is input.
2 R TALLY lamp (red)
Lights when the red tally signal is input.
3 Up-tally lamp (red)
Set UP TALLY switch to ON. The lamp lights in the
same way as the R tally lamp.
The supplied number plate can be attached to this.
4 Tilt lock lever
Fixes any tilting position.
5 12-pin connector
Connects to a video camera's VF connector, using the
supplied connecting cable.
Power and video/tally signals are supplied through this
connector.
1)
6 CONTRAST knob
Adjusts the contrast of the viewfinder picture.
7 BRIGHT knob 1)
Adjusts the brightness of the viewfinder picture.
1 2
8 PEAKING switch and knob
Setting this switch to ON and turning the knob corrects
viewfinder image.
Used to adjust the focus on the video camera.
Depending on the camera to be used with the BVF-55,
the peaking control can be turned off by a control
signal sent from the camera even if the PEAKING
switch is set to ON.
1) These controls do not affect the output signal of the video
camera.
3
4
5
1)
3(GB)