Editing Network Properties - HP iPAQ hw6500 series User Manual

Note:
In the event the automatic detection setting fails, you will
need to complete one of the two following items:
Select the appropriate country and operator name, then tap
OK. The settings will automatically update.
If your operator name does not appear in the drop-down
list, you must manually add it to the list by tapping the
down arrow in the Operator box and tapping "Create New
. . .". To create a new connection, refer to "Creating a New
Connection" in
Connections."

Editing Network Properties

CAUTION: Editing Network Properties is not recommended unless you
are being accompanied by service provider Help.
Tapping on the Edit Network Properties bar on the GPRS
Settings screen gives you access to the following areas:
User's Guide
Revised: 12/16/04
Chapter 7, "Making Your Data
Internet Connection Information—Walks you through
the different settings for GPRS (General Packet Radio
Service) and CSD (Circuit Switched Data) connections.
Text Message (SMS)—Allows you to modify the Text
Message service center number.
MMS Multimedia Messages—Allows you to modify the
Multimedia Message Service Center (MMSC) address.
WAP Information
Using the Phone Features
5–29