Aligning The Screen; Routine Care - HP iPAQ hw6500 series User Manual

Aligning the Screen

When the HP iPAQ is turned on for the first time, you are guided
through a screen alignment process. You must realign your screen
if:
The HP iPAQ does not respond accurately to your taps.
You perform a hard reset of your HP iPAQ.
To realign the HP iPAQ screen:
1. From the Start menu, tap Settings > System tab > Screen
icon.
2. Tap the Align Screen button.
Shortcut: To access the Align Screen application without
tapping on the screen, push down and hold the 5-Way
Navigational button and the Contacts application button
located to the left of the Navigational button.
3. Tap the cross-hair object at each location. Be precise when
tapping the cross-hair object.
4. Tap OK.

Routine Care

To keep your HP iPAQ in good condition and working properly,
follow these guidelines:
Keep your HP iPAQ away from excessive moisture and
temperature extremes.
Do not expose your HP iPAQ to liquids or precipitation.
Avoid exposing your HP iPAQ to direct sunlight or strong
ultraviolet light for extended periods of time.
When not in use, store your HP iPAQ in a case. You can
select from a wide variety of case options at
www.hp.com/go/ipaqaccessories
User's Guide
Getting to Know Your HP iPAQ Mobile Messenger
.
1–13