Expansion Cards - HP iPAQ hw6500 series User Manual

Expansion Cards

For more information on expansion cards, refer to
"Expansion Cards."
Problem
My HP iPAQ
does not
recognize the
SD expansion
card.
I cannot insert
my SD card.
I cannot remove
my SD card.
User's Guide
Solution
Be sure you have firmly pushed the SD expansion card
into the HP iPAQ.
Be sure any third party drivers are installed.
Reset the device by using the stylus to lightly press the
Reset button on the bottom of the HP iPAQ.
Be sure the label is facing the front of the unit.
Be sure you are not inserting the card at an angle.
Be sure you insert the connection area first.
Be sure you are not inserting an SD size card into the
mini-SD slot.
Push the SD card in to release the locking mechanism. The
card will pop out slightly and can then be easily removed.
Troubleshooting
Chapter 11,
15–11