TomTom RIDER Manual page 7

Lisbon.book Page 10 Thursday, March 1, 2007 8:39 AM
EN
Using your TomTom RIDER
Switching on
Using
your
TomTom
RIDER
1. Open the compartment on the bottom of
your TomTom RIDER.
2. Push the memory card into the memory
card slot.
3. Press and hold the On/Off button for 2
seconds, or until your TomTom RIDER
starts.
The first time you switch on your
TomTom RIDER, it may take up to 20 seconds
to start. To switch off your TomTom RIDER,
press and hold the On/Off button for 2
seconds.
Setting up
First, you have to answer a few questions to
set up your device and your Cardo scala-
rider™ headset. Answer the questions by
tapping the screen. You will use the
touchscreen for everything you do with your
TomTom RIDER.
Follow the instructions to establish a
Bluetooth connection between your
TomTom RIDER and your Cardo scala-rider™
headset.
Once you have answered the questions, your
TomTom RIDER will display the Driving View.
The screen is shown in black and white until
your TomTom RIDER locates your current
position. Once this is done, the Driving View is
shown in full color.
10