Attaching The Shoulder Strap - Sony HXC-FB80 Operating Instructions Manual

2
Place the camera on the tripod adaptor and slide it forward
along the groove of the platform until it clicks into place.
3
Move the camera back and forth, and check that it is
securely fixed.
To remove the camera from the tripod adaptor
Hold down the red button and pull the lever in the direction of the
arrow.
Red button
If the pin of the tripod adaptor does not return to its
original position
After removing the camera, if the pin of the tripod adapter does not
return to its original position (storage position), hold down the red
button and move the lever in the direction of the arrow to return the
pin to its original position. It is not possible to mount a camera if the
pin remains in the center.
Pin storage position
Pin
Lever
26

Attaching the Shoulder Strap

Attach an optional shoulder strap (part number: A-6772-374-C) to
the camera.
1
Fit one of the clips to the shoulder strap fitting.
Pull up the strap to secure it in place.
Clip
2
Fit the other clip to the shoulder strap fitting on the other
side of the grip.
To remove the shoulder strap
Press here and pull in the direction shown by the arrow.