Attaching And Adjusting The Lens - Sony HXC-FB80 Operating Instructions Manual

<DATE>
DATE/TIME
x
2016/04/30
FILE TIMESTAMP FORMAT
: 5 M/D/Y
6
Set the date and time items.
Rotate the menu control knob to select an item, and press the
menu control knob.
Rotate the menu control knob to change the setting of the
selected item, and press the menu control knob to confirm the
setting.
7
When finished, set the DISPLAY/MENU switch to OFF to
exit menu mode.

Attaching and Adjusting the Lens

For information on handling lenses, refer to the operation manual
for the particular lens.
Attaching the lens
Note
Before attaching the lens, power off the camera first.
M14 TOP
08:32
1
Push the lens locking lever up and remove the lens mount
cap from the lens mount.
2
Align the center pin on the lens with the center slot in the
lens mount, and insert the lens into the mount.
3
Holding the lens in place, push the lens locking lever down
to lock the lens.
Caution
If the lens is not firmly locked, it may come off while the
camera is being used. This could cause a serious accident.
Make sure the lens is firmly locked. It is recommended that the
lens mount securing rubber be put on the lens locking lever as
illustrated above.
4
Connect the lens cable to the LENS connector.
5
Secure the lens cable with the cable clamps.
23
Lens mount
securing rubber