Interface Module Installation (Optional) - Samsung AC026HBLDKH Installation Instructions Manual

Interface module Installation (Optional)

Only for : Global Duct Type
Accessories (Interface module : MIM-B13D)
Interface module
Accessories (Interface module : MIM-B14)
External Control
1. Fix the case at with bolts on the side of the control box in the indoor unit.(See the picture)
2. Attach the Interface module PCB to the case in the control box of the indoor unit, then
connect the power and the communication cable between the Interface module and the
indoor unit;
3. If you install a Interface module to an indoor unit, every outdoor unit which is connected to an
indoor unit can be controlled simultaneously.
4. Each indoor unit connected to the same centralized
module.
Accessories (SPI module : MSD-EAN1)
SPI
Refer to the module(MSD-EAN1) installation manual for the more information.
20
DC power cable Communication cable
PCB Case Haness Wire(2P)
controller has its own Interface
PCB Case Cable-tie
Haness Wire (4P) Screw